Metal Takviyeli Contalar

Application Areas:

  • Gas and water lines
  • Rubber lined pipe line flanges
  • Enamel lined pipe line flanges
  • Low pressurides plastic pipe lines

Raw Material:  EPDM – KTW

  • Application: Potable water, waste water
    • KDW D1/D2, 1.3.31 W270, ACS
    • BGA Potable water
  • Color: Black
  • Hardness: DIN 53505, Shore A 70 +/- 5
  • Density : DIN 53479, 1.120 g/cm3
  • Temperature: Up to 150 oC
  • Surface porosity: Maw. 50 – 100 microns
  • Certificates: KTW (D1,D2,DVGW-W-270, ACS)

Chemical Irresistance:

  • Oily, aromatic and clorated hydracarbons
  • Highly concentrated acides

Mechanical Properties:

According to DIN2505:

Ko x KD = 2b (N/mm2)

K1= 0,5 mm

Chemical Resistance:

  • Water and salty water
  • Diluted acides
  • Polar materials like ester and caeton
  • Washing materials
  • Water-glycol based HFC liquids
  • Phosphor acide ester based HFD-R liquids

Utilisation :

EPDM gaskets has good life against ozon

aging and bad weather conditions

Functional Resistance :

The endurance life and functional strength of

our gaskets depend highly on the application

methods. Therefore, it must be referred to

our usual manual.

METALLO RUBBER GASKETS

Application    : For potable/waste water to max. 100 oC.

Range    : DN 15-2000

Material    : EPDM

Pressure Class  : PN10 – 40

Dimensions    : DIN EN 1514-1

Density    : 1.120 g/cm3 to DIN53479

Hardness  : 70 ±5 Shore A to DIN53505

Colour    : Black

CELEKS Metallo Rubber Gaskets are made of Elastomere Butadien Rubber (EPDM) in different types with inside vulcanised steel ring.

The vulcanised rubber gasket’s cross section is in lens form and with rounded edges.

With the help of inside vulcanised steel ring, good resistance to bolt forces is assured.

Outer diameter of the gasket fits to the inner bolt circuit for self centering.

CELEKS EPDM Metallo Ruber Gaskets have resistance against water and water dilution of salts, many of diluted acids and alkalines, polar media as alcohol, ester and ketone, washing agents, hydraulic media based on water-glycol (HFC fluids), hydraulic madia based on phosphoric esters (HFD-R fluids).

Their performance and life depend mainly on proper storage and fitting factors beyond the manufacturer’s control.

DİĞER ÜRÜNLER